User Manual Q&AAnswer
Feb 14, 2025 - 04:01 AM
To install the HYDAN SAFES Size 1 Ranger Square Door Underfloor Safe, please follow the installation instructions provided with the product. Here is a step-by-step guide:
1. Choose a suitable location: Select a secure and hidden location for the safe, preferably on a concrete floor. Ensure there are no electrical or plumbing lines beneath the chosen spot.
2. Prepare the floor: Clear the area and ensure it is clean and level. If necessary, use a chisel or drill to create a recessed area in the floor to accommodate the safe.
3. Mark the location: Place the safe in the desired position and mark the corners of the base on the floor using a pencil or marker.
4. Cut the opening: Use a suitable cutting tool to create a hole in the floor, following the marked corners. Ensure the dimensions of the hole match the external dimensions of the safe.
5. Prepare the safe: Remove the safe door and any packaging materials. Attach the installation template provided with the safe to the base of the safe using the supplied screws.
6. Position the safe: Carefully lower the safe into the hole, ensuring it fits securely. Adjust the position as necessary to align with the opening.
7. Secure the safe: Once the safe is in place, use suitable fixings (not included) to secure it to the floor. Ensure the safe is level and firmly anchored.
8. Reattach the door: Reattach the safe door using the provided screws and ensure it is properly aligned and functioning.
9. Test the safe: Check that the door opens and closes smoothly. Test the locking mechanism to ensure it is working correctly.
10. Conceal the safe: If desired, cover the safe with a suitable material or flooring to further conceal its presence.
Please note that this is a general guide, and it is important to refer to the specific installation instructions provided with the HYDAN SAFES Size 1 Ranger Square Door Underfloor Safe for detailed and accurate installation steps.
Add New Comment