User Manual Q&AAnswer
Feb 14, 2025 - 04:00 AM
To assemble and install the TRIO 212069142 Wall Lamp, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Safety Precautions:
- Before starting the assembly, carefully read and understand the safety instructions provided in the manual.
- Ensure that the power supply is turned off before installation.
2. Unpacking:
- Remove all the components from the packaging and check if everything is included as per the parts list provided in the manual.
3. Mounting the Wall Bracket:
- Choose a suitable location on the wall where you want to install the wall lamp.
- Mark the position for the wall bracket and ensure it is level.
- Use appropriate screws and wall plugs (not included) to securely mount the wall bracket to the wall.
4. Wiring:
- Connect the wires from the wall bracket to the electrical wiring in your wall, following the electrical code and regulations of your country.
- If you are not familiar with electrical work, it is recommended to consult a qualified electrician for assistance.
5. Attaching the Lamp Body:
- Once the wall bracket is securely mounted and wired, attach the lamp body to the bracket according to the provided instructions.
- Ensure that the lamp body is properly aligned and tightened to the bracket.
6. Bulb Installation:
- Depending on the specific model of the TRIO 212069142 Wall Lamp, it may require a specific type of bulb (not included).
- Refer to the manual for the recommended bulb type and wattage.
- Follow the instructions provided to install the bulb securely.
7. Final Adjustments:
- After the lamp is fully assembled and installed, make any necessary adjustments to the position and angle of the lamp body to achieve the desired lighting effect.
Please note that the above instructions are a general guideline. For specific details and diagrams, refer to the TRIO 212069142 Wall Lamp's instruction manual provided with the product.
Add New Comment