User Manual Q&AAnswer
Feb 14, 2025 - 03:29 AM
To assemble and install the TRIO 2042602XX Garden Wall Lamp, please follow these steps:
1. Safety Precautions:
- Before starting, make sure to read and understand all the safety instructions provided in the manual.
- Ensure that the power supply is switched off before installation.
- If you are unsure about any step, consult a qualified electrician.
2. Gathering the Required Tools:
- Before starting the installation, gather the necessary tools, including a screwdriver and wire strippers.
3. Mounting the Lamp:
- Choose a suitable location on the wall where you want to install the lamp.
- Mark the positions for drilling holes according to the lamp's mounting bracket.
- Drill the holes and insert the appropriate wall plugs.
- Attach the lamp's mounting bracket securely to the wall using screws.
4. Wiring:
- Connect the wires from the lamp to the electrical supply.
- Strip the insulation from the ends of the wires.
- Connect the live wire (usually brown or red) to the live terminal and the neutral wire (usually blue or black) to the neutral terminal.
- Ensure that the connections are tight and secure.
- If necessary, consult a qualified electrician for assistance with the wiring.
5. Installing the Bulbs:
- Remove the lamp's cover or glass shade to access the bulb holders.
- Insert the GU10 bulbs into the holders, making sure they are securely fitted.
- Replace the lamp's cover or glass shade.
6. Testing:
- Once the lamp is fully assembled and wired, switch on the power supply.
- Test the lamp to ensure it is functioning correctly.
- If the lamp does not work, double-check the wiring connections and bulb installation.
Please note that this answer is a general guide based on the information provided. For more specific instructions and illustrations, refer to the instruction manual that came with the TRIO 2042602XX Garden Wall Lamp
Add New Comment