User Manual Q&AAnswer
Feb 14, 2025 - 03:24 AM
Installation of the AqualDEA B90W Underwater Light is a straightforward process. Please follow the steps below to ensure a successful installation:
1. Preparation: Before starting the installation, make sure you have all the necessary tools and equipment. You will need a screwdriver, a drill, a silicone sealant, and a power source.
2. Location: Choose a suitable location for the underwater light. It should be submerged in water and positioned in a way that provides optimal lighting effects. Ensure that the chosen location is free from any obstructions or debris.
3. Drill Holes: Use a drill to create holes for mounting the light. Refer to the product manual for the recommended hole size and spacing. Make sure to drill the holes at the desired depth to achieve the desired lighting effect.
4. Wiring: Connect the power supply to the underwater light. Follow the wiring diagram provided in the product manual to ensure correct connections. Use waterproof connectors or junction boxes to protect the electrical connections from water damage.
5. Mounting: Insert the light into the drilled holes and secure it in place using the provided mounting hardware. Ensure that the light is properly aligned and positioned as desired.
6. Sealing: Apply a silicone sealant around the edges of the light to create a watertight seal. This will prevent water from entering the installation area and protect the electrical connections.
7. Testing: Once the installation is complete, test the light to ensure it is functioning properly. Turn on the power supply and check if the light illuminates as expected. If any issues are encountered, refer to the troubleshooting section of the product manual or contact the manufacturer for assistance.
Please note that the above instructions are a general guideline. It is essential to refer to the specific installation instructions provided in the AqualDEA B90W Underwater Light manual for accurate and detailed information.
Add New Comment