User Manual Q&AAnswer
Feb 14, 2025 - 03:21 AM
To assemble the Sage BJS700 Big Squeeze Slow Compression Juicer, follow these steps:
1. Firmly insert the compression silicone into the slot below the pulp spout. This is important to prevent any leakage.
2. Assemble the strainer into the rotation wiper and place this assembly into the juicing bowl, ensuring that the red dot on the strainer is aligned with the red dot on the juicing bowl.
3. Place the juicing xxxx into the strainer and turn and press down on it until it clicks into place. The juicing xxxx needs to be locked in place in order to close the drum lid.
4. Place the drum lid onto the juicing bowl, aligning the dot on the drum lid with the red dot on the juicing bowl. For easy assembly, hold the drum lid by grabbing the feeding tube and turning it clockwise.
5. Align the red dot on the drum lid with the ALIGN mark on the body and turn it to the CLOSE position. The juicer will not operate if the down arrow on the drum lid is not completely aligned with the CLOSE mark on the body.
6. Place the pulp cup under the pulp spout and the juice jug under the juice spout.
By following these steps, you will have successfully assembled the Sage BJS700 Big Squeeze Slow Compression Juicer.
Add New Comment