How do I attach the anti-tip kit to the wall for the Babyletto 9016 Lolly 6 Drawer Double Dresser? (babyletto 9016 Lolly 6 Drawer Double Dresser Instruction Guide)

Answer

manuals.plus

Feb 14, 2025 - 03:17 AM

To attach the anti-tip kit to the wall for the Babyletto 9016 Lolly 6 Drawer Double Dresser, follow these steps:

1. Determine your wall material: The instructions provide guidance for attaching the anti-tip kit to drywall or plaster with an available wood stud, drywall without an available wood stud, and other wall materials.

2. For drywall or plaster with an available wood stud:
a. Mark the attachment point with a pencil, 1" to 2" (25-50 mm) below the top of the dresser, positioned over a wood stud.
b. Drill a 1/8-inch (3 mm) diameter pilot hole into the wood stud on the pencil mark.
c. Follow the appropriate pictogram instructions provided in the manual to drive the xxxx with washer through the textile strap and tighten the xxxx firmly into the wood.

3. For drywall without an available wood stud:
a. Mark the attachment point with a pencil, 1" to 2" (25-50 mm) below the top of the dresser.
b. Drill a 3/8-inch (9 mm) diameter hole through the wall on the pencil mark.
c. Drive the plastic anchor into the hole, using a hammer if needed.
d. Follow the appropriate pictogram instructions provided in the manual to drive the xxxx with washer through the textile strap and tighten the xxxx firmly into the plastic anchor in the wall. Do not over-tighten.

4. If your wall material is not listed or if you have any questions, consult your local hardware store for guidance.

Please note that it is crucial to follow these instructions to reduce the risk of furniture tipover. The anti-tip kit is an important safety feature for the dresser.