User Manual Q&AAnswer
Feb 14, 2025 - 03:13 AM
To assemble and install the TRIO 214260142 Wall Lamp, please follow the instructions below:
1. Safety Precautions:
- Before starting the installation, make sure to read and understand all the safety instructions provided in the manual.
- Ensure that the power supply is turned off before handling the lamp or performing any electrical connections.
2. Mounting the Lamp:
- Choose a suitable location on the wall where you want to install the lamp.
- Mark the desired position for the lamp's mounting bracket.
- Use appropriate screws and wall plugs (not included) to securely attach the mounting bracket to the wall.
3. Electrical Connections:
- Connect the lamp to a suitable power source (230V-50Hz).
- Make sure the power supply is turned off before making any electrical connections.
- Remove the lamp's cover to access the electrical connections.
- Connect the lamp's wires to the corresponding wires in your electrical installation.
- Ensure that the connections are securely tightened and insulated.
4. Installing the Bulb:
- The TRIO 214260142 Wall Lamp uses a GU10 bulb with a maximum power of 35W (not included).
- Insert the GU10 bulb into the lamp's socket and twist it clockwise until it is securely in place.
- Make sure not to exceed the maximum wattage specified for the lamp.
5. Finalizing the Installation:
- Once the lamp is securely mounted and the electrical connections are made, carefully place the lamp cover back in position.
- Ensure that the cover is properly aligned and securely fastened.
For more detailed instructions or troubleshooting information, please refer to the official manual provided by TRIO Leuchten GmbH. You can also visit their website at trio-lighting.com/214260142 for additional support or contact their customer service directly.
Remember, if you are unsure about any step of the installation process, it is always recommended to consult a professional electrician for assistance.
Add New Comment