User Manual Q&AAnswer
Feb 14, 2025 - 03:00 AM
To use the KING TONY 7914A-35 Tube Cutter for Copper, follow these steps:
1. Prepare the pipe: Ensure that the pipe you are cutting is clean and free from any debris or burrs.
2. Adjust the cutting wheel: Use the quick adjustment feature to set the cutting wheel at the desired position. This will depend on the size of the pipe you are working with. Make sure the cutting wheel is securely in place.
3. Position the tube cutter: Place the tube cutter around the pipe, ensuring that the cutting wheel is aligned with the desired cutting point.
4. Apply pressure: Firmly grip the ergonomic handle and apply pressure to the tube cutter. Rotate the cutter around the pipe in a clockwise direction, gradually increasing the pressure as you go.
5. Continue cutting: Keep rotating the tube cutter around the pipe until the cutting wheel has made a complete revolution. This may require multiple rotations depending on the thickness of the pipe.
6. Deburring: After cutting the pipe, retract the deburring tool if it is included with your specific model. Use the deburring tool to remove any burrs or rough edges from the cut end of the pipe.
7. Repeat if necessary: If you need to make additional cuts, repeat the above steps as needed.
Remember to always wear appropriate safety gear, such as gloves and safety glasses, when using the tube cutter. Refer to the user manual for any specific instructions or precautions related to your model of the KING TONY 7914A-35 Tube Cutter for Copper.
Add New Comment