How do I install the DiO Rev-Kit 02 Wireless and Connected Two Way Switch Kit? (DiO Rev-Kit 02 Two Way Switch Kit User Manual)

Answer

manuals.plus

Feb 14, 2025 - 02:54 AM

To install the DiO Rev-Kit 02 Wireless and Connected Two Way Switch Kit, follow these steps:

1. Disconnect the power supply before servicing.
2. Remove your mechanical switch.
3. Connect the L (brown or red) wire to the L terminal of the module.
4. Connect the cable from the bulb (brown or red) to the L1 terminal of the module.
5. Connect the capacitor in parallel to the bulb for optimal operation.
6. If your installation has a neutral wire at the switch, connect the 2 neutral (blue) wires together using a connector.
7. Install the switch on the wall using the provided claws and screws.
8. Remove the front plate of the wireless switch and remove the tab at the battery.
9. Change the battery if needed by following the instructions in the manual.
10. To associate the switch with the DiO system, press the central button of the wired switch twice quickly, then press the 'ON' button on the remote control, wireless switch, or DiO 1.0 sensor within 15 seconds.
11. The switch can be linked to up to 6 different DiO commands. To delete a command, follow the instructions in the manual.
12. To add the switch to the DiO One app, download the app, create an account, select "My devices" and press "+", select "DiO Connect lighting switch", power the switch and press the central button for 3 seconds, then follow the installation wizard on the application.
13. To disable Wi-Fi from the switch, press the central button for 3 seconds, release, and press twice quickly.
14. The switch has different light states indicated by the LED, such as steady red for not connected to Wi-Fi, flashing blue for properly connected, solid blue for connected to the cloud, solid white for on, and fixed purple for Wi-Fi disabled.
15. To associate the switch with a voice assistant, activate the "One 4 All" service or skill in your voice assistant app and enter your DiO One account information.
16. To reset the switch to its factory settings, press and hold the central button for 12 seconds until the LED flashes light blue and release.

Please refer to the user manual for more detailed instructions and safety precautions.