User Manual Q&AAnswer
Feb 14, 2025 - 02:39 AM
To change the accessories on the RYOBI FVM51 Rotary Tool Accessory Kit, follow these steps:
1. Ensure that the rotary tool is turned off and unplugged before attempting to change the accessories.
2. Locate the collet nut on the front of the rotary tool. The collet nut is used to secure the accessories in place.
3. Insert the provided wrench into the two holes on the collet nut. Use the wrench to loosen the collet nut by turning it counterclockwise.
4. Once the collet nut is loose, remove the current accessory by pulling it straight out from the collet.
5. Select the desired accessory from the accessory table provided in the user manual. Ensure that the accessory is compatible with the RYOBI FVM51 Rotary Tool.
6. Insert the new accessory into the collet, making sure it is fully inserted and seated securely.
7. Use the wrench to tighten the collet nut by turning it clockwise. Ensure that the collet nut is tightened securely to prevent the accessory from coming loose during use.
8. Verify that the accessory is properly installed by giving it a gentle tug to ensure it is securely held in place.
9. You can now plug in the rotary tool and turn it on to use the newly installed accessory.
Remember to always refer to the user manual and use only the recommended accessories to ensure safe and proper operation of the RYOBI FVM51 Rotary Tool Accessory Kit.
Add New Comment