Answer

Feb 14, 2025 - 02:30 AM
To reverse the door on your UNIQUE UGP-278L P S-S Bottom Mount Refrigerator, please follow these steps:
1. Before starting, make sure the appliance is disconnected from the electrical power supply.
2. Use a Flathead screwdriver to remove the hinge top cover by popping it up off the steel hinge from the sides.
3. Use a Phillips head screwdriver to remove the three bolts from the hinge to remove the hinge.
4. Lift the fridge door up and remove it from the fridge.
5. Switch the three plugs from the left-hand side to the right side at the top.
6. Use a Phillips head screwdriver to remove the two bolts from the middle hinge to remove the hinge.
7. Lift the freezer door up and remove it from the freezer.
8. Set aside the freezer door and fridge door in a safe place.
9. Tilt back the fridge and unscrew the bottom foot.
10. Remove both feet and the door support to remove the hinge.
11. Switch the two plugs from the left side to the right side using the two new plugs provided in the manual bag.
12. Add the left-hand side lower hinge bracket.
13. Reattach the feet.
14. Add back the freezer door.
15. Add back the middle hinge.
16. Stand up the fridge.
17. Add back the fridge door.
18. Add the hinge cover.
After following these steps, your UNIQUE UGP-278L P S-S Bottom Mount Refrigerator door should be successfully reversed. If you have any further questions or need assistance, please refer to the product manual or contact UNIQUE Appliances customer service.
Add New Comment