Answer

Feb 14, 2025 - 02:18 AM
To install the EGLO 205287A SARABIA Pendant Light, please follow these steps:
1. Safety Precautions:
- Before starting the installation, turn off the electrical power at the breaker panel.
- This product must be installed by a person familiar with the construction and operation of the product and the hazards involved.
2. Gather the necessary tools and materials:
- Screwdriver
- Wire strippers
- Wire connectors
- Mounting hardware (included with the light fixture)
3. Mounting the light fixture:
- Determine the desired location for the pendant light and mark the spot on the ceiling.
- Use the provided mounting hardware to secure the mounting plate to the ceiling, ensuring it is securely fastened.
4. Wiring the light fixture:
- Carefully remove the electrical cover plate from the pendant light.
- Connect the wires from the light fixture to the corresponding wires in the electrical box using wire connectors.
- Follow the color-coded wiring instructions in the manual to ensure proper connections (e.g., black to black, white to white, and green or copper to the ground wire).
- Carefully tuck the wires into the electrical box and attach the cover plate back onto the pendant light.
5. Finishing the installation:
- Once the light fixture is securely mounted and wired, turn on the electrical power at the breaker panel to test the light.
- Adjust the height of the pendant light if necessary by adjusting the length of the cord or chain (if applicable).
- Ensure that the light fixture is level and securely fastened.
Please note that the above instructions are a general guide. For specific installation details and any additional information, refer to the EGLO 205287A SARABIA Pendant Light's instruction manual provided by Eglo Canada Inc. / Eglo USA Inc.
Add New Comment