How do I install the EGLO 99633A MASETA Pendant Light? (EGLO 99633A MASETA Pendant Light Instruction Manual)

Answer

manuals.plus

Feb 14, 2025 - 01:58 AM

To install the EGLO 99633A MASETA Pendant Light, please follow the steps below:

1. Safety Precautions:
- Before starting the installation, turn off the electrical power at the breaker panel.
- The installation should be carried out by a person familiar with the construction and operation of the product and the associated hazards.

2. Mounting the Canopy:
- Attach the canopy to the electrical box on the ceiling using the provided screws.
- Ensure that the canopy is securely fastened.

3. Wiring:
- Connect the electrical wires from the ceiling to the corresponding wires on the pendant light fixture.
- Match the black wire (hot) from the ceiling to the black wire from the pendant light.
- Match the white wire (neutral) from the ceiling to the white wire from the pendant light.
- Connect the grounding wire from the ceiling to the grounding wire on the pendant light.

4. Adjusting the Cord Length:
- The minimum cord length between the canopy and luminaire frame should be 100mm (4 inches).
- Adjust the cord length as necessary, ensuring it is not shorter than the minimum requirement.

5. Hanging the Pendant Light:
- Attach the pendant light fixture to the canopy by aligning the openings and twisting it into place.
- Ensure that the pendant light is securely attached to the canopy.

6. Power On:
- After completing the installation, turn on the electrical power at the breaker panel.
- Test the pendant light to ensure it is functioning properly.

Please note that the product may not look exactly as shown in the figures provided in the manual. For any further assistance or clarification, please refer to the EGLO 99633A MASETA Pendant Light Instruction Manual or contact the manufacturer directly.