User Manual Q&AAnswer
Feb 14, 2025 - 01:55 AM
To pair the Xblitz Uni Pro 1 wireless earphones with your phone, you can follow the automatic pairing or manual pairing method outlined in the user manual.
Automatic pairing:
1. Remove the insulation tape from the earphones and place them back into the charging case to charge.
2. If the earphones are not charging in the case, connect the USB power cord to the power port of the case.
3. After taking the earphones out of the case, each earphone should have a blue LED flashing, indicating that the device is turned on.
4. If the earphone LEDs are alternating between blue and red, the device is ready to pair.
5. Turn on Bluetooth connectivity on your phone and select "Xblitz UNI PRO 1" from the list of available devices.
6. Once the earphones are paired with your phone, the LEDs will stop flashing and your phone will display relevant information, such as "Connected, 100% battery left."
Manual pairing (when automatic pairing fails):
1. Press and hold the button on the earphone for 3 seconds to turn it on. The LED in the device will start flashing blue.
2. Press and hold the button on the earphone for 5 seconds, and then double-click again to enter pairing mode. The pairing mode is indicated by the LEDs alternating between blue and red.
3. Turn on Bluetooth connectivity on your phone and select "Xblitz UNI PRO 1" from the list of available devices.
4. Once the earphones are paired with your phone, the LEDs will stop flashing.
Remember, if the earphones are put back into the case, they will automatically turn off. Taking them out of the case will automatically turn them on and pair them again with your phone.
Add New Comment