User Manual Q&AAnswer
Feb 14, 2025 - 01:21 AM
To assemble the Midea MVC-V12K-GR Vacuum Cleaner before use, follow these steps:
1. Connect the hose to the vacuum cleaner: Put the hose connector in front of the vacuum cleaner and insert it into the inlet hole. Turn it right to secure it. To disassemble, turn the hose connection left and pull it out.
2. Connect the hose to the extending plastic tube: Hold the flexural connector of the hose and insert it into the bigger hole of the tube.
3. Adjust the extending plastic tube: Put the tube into the bigger hole of the other one.
4. Connect the tube to the brush tool: Insert the plastic tube into the hole of the brush and rotate it to fasten them.
5. Check the winding of the power cord: Pull the power cord out of the machine until you see the yellow mark. Make sure the red mark is not out. After using the vacuum cleaner, turn off the power, pull the plug out of the socket, and push the winding device button until the cord is completely in the machine.
6. Power on the vacuum cleaner: Plug the vacuum cleaner into the socket and push the power button to control its operation.
Please refer to the instruction manual for visual representations of the assembly process (Figures 1-6).
Add New Comment