User Manual Q&AAnswer
Feb 14, 2025 - 01:15 AM
To clean and maintain the Graham Field LS100-35 Lumex Select Foam Mattress, follow these instructions:
1. Regular Cleaning: The mattress must be cleaned regularly and after each use. Remove the bedding while the mattress is unoccupied. Wipe the top and bottom covers clean with neutral soap suds and warm water, or use one of the standard cleaning solutions listed in the manual. Rinse the covers with clean water and allow them to air dry.
2. Hard-to-Clean Areas: For hard-to-clean areas, use a damp sponge and clean as described in the routine care section. Do not use harsh solvents, cleaners, or detergents to clean the mattress cover.
3. Disinfection: Germicides and disinfectants should be diluted as specified on the product label by the manufacturer. An 8%-10% bleach/water solution may also be used to wipe down the mattress cover. Allow the cover to air dry after disinfection.
Please note that opening the mattress cover during cleaning, infection control procedures, or use is not recommended. Also, do not autoclave or launder the mattress cover.
For more information and specific instructions, please refer to the "Maintenance and Cleaning Instructions" section in the Graham Field LS100-35 Lumex Select Foam Mattress manual.
Add New Comment