User Manual Q&AAnswer
Feb 14, 2025 - 01:10 AM
Sure! Here is a step-by-step guide on how to wire the HOFTRONIC LED Module 230V AC:
1. First, drill a hole in your ceiling according to the recommended size listed on the packaging of the fixture. This hole will be used to install the recessed downlight.
2. Next, refer to the wiring diagram on the front of the card that came with the LED module. This diagram will guide you on how to connect the module to the power source. Make sure to follow the diagram carefully to ensure proper wiring.
3. Once you have understood the wiring diagram, proceed to connect the LED module to the power source. This typically involves connecting the live wire (usually colored brown or black) to the live terminal, the neutral wire (usually colored blue) to the neutral terminal, and the earth wire (usually colored green or yellow) to the earth terminal. It is important to ensure that the connections are secure and properly insulated.
4. After wiring the LED module to the power source, mount the module into the recessed downlight's fixture. This may involve inserting the module into the hole in the ceiling and securing it in place using the provided mounting brackets or screws.
5. Finally, turn the power back on and test the LED module to ensure it is functioning correctly. If the module does not turn on or there are any issues, double-check the wiring connections and consult the product manual for troubleshooting steps.
Please note that it is always recommended to consult a qualified electrician or professional if you are unsure about any aspect of the wiring process. Safety should always be the top priority when working with electrical installations.
Add New Comment