User Manual Q&AAnswer
Feb 14, 2025 - 12:48 AM
To fold the Motion healthcare ML.001 mLite Folding Mobility Scooter, follow these steps:
1. Lift up the floorpan in the center at the indicated point and slide the front wheels towards the rear.
2. Disconnect the backrest by lifting the clip in the center off the seat upwards.
3. Rotate the backrest backwards and clip it underneath the seat.
4. Pull the yellow handle on the rear of the seat to unlock the seat.
5. Tip the front of the seat slightly forwards and push the whole seat downwards to lock it in the closed position on the floorpan.
6. Pull the yellow Tiller Adjustment xxxx and push the tiller down to lock it into the seat in the closed position.
7. The scooter can then be lifted and the handle can be extended to the desired height by pressing the yellow handle release button to the right and sliding the handle up until it locks into the correct position.
To unfold the scooter, follow these steps:
1. Pull the yellow Tiller Adjustment xxxx and lift the tiller up to lock it into the upward position.
2. Tip the rear of the seat slightly upwards and lift the whole seat up to lock it in the open position.
3. Disconnect the backrest and lift it up into the upright position.
4. Lock the backrest in place by clipping it into the seat base.
5. Pull the front wheels forwards until the floorpan is flat.
Please refer to the user manual for visual illustrations and further details on folding and unfolding the scooter.
Add New Comment