User Manual Q&AAnswer
Feb 14, 2025 - 12:26 AM
To clean the Whirlpool GMA 7522 Burner Gas Hob, follow these steps:
1. Disconnect the appliance from the power supply.
2. Clean the hob surface with warm water and a neutral solution. Use a soft cloth or sponge to wipe away any spills or stains.
3. For stainless steel surfaces, use warm water and a neutral detergent. Dry with a soft cloth or chamois. Remove baked-on dirt with specific cleaners for stainless steel surfaces.
4. Do not use abrasive or corrosive products, chlorine-based cleaners, or pan scourers.
5. Do not use steam cleaning equipment or flammable products.
6. Do not leave acid or alkaline substances, such as vinegar, mustard, salt, sugar, or lemon juice on the hob.
7. Clean the grids, burner caps, and burners by hand with warm water and a non-abrasive detergent. Remove any food residues and check that none of the burner openings are clogged.
8. Rinse and dry the grids, burner caps, and burners.
9. The cast-iron grates may be cleaned in the dishwasher. Remove any burnt-on food before placing the grates in the lowest rack of the dishwasher.
10. Refit the burners and burner caps correctly in their respective housings.
11. When replacing the grids, make sure that the panstand area is aligned with the burner.
Note: Models equipped with electrical ignition plugs and safety devices require thorough cleaning of the plug end to ensure correct operation. Check these items frequently, and if necessary, clean them with a damp cloth. Any baked-on food should be removed with a toothpick or needle.
It is important to follow these cleaning instructions to ensure the proper maintenance and longevity of your Whirlpool GMA 7522 Burner Gas Hob.
Add New Comment