How do I install the ABBA LIGHTING STA08 3.5W Horizontal Waterproof Stair Light? (ABBA LIGHTING STA08 3.5W Stair Light User Manual)

Answer

manuals.plus

Feb 14, 2025 - 12:17 AM


To install the ABBA LIGHTING STA08 3.5W Horizontal Waterproof Stair Light, please follow these steps:

1. Pull the power supply wires out from the OUTLET BOX. Attach the power supply wires to the fixture lead wires by connecting the BLACK wire to the BLACK wire and the WHITE wire to the WHITE wire using the provided WIRE NUTS.

2. Select the desired CCT (Color Correlated Temperature) from 3000K/4000K/5000K by pushing the toggle switch left or right.

3. After connecting the wires, carefully tuck them inside the outlet box. Mount the MOUNTING BRACKET on the outlet box using the provided MOUNTING SCREWS.

4. Make sure the mounting screws are not too tight to bend the mounting bracket. Then press the FACE PLATE onto the mounting bracket. The clips of the face plate will fix them together.

5. This is an integrated LED fixture, so there are no bulbs to replace. After installing the fixture, it is recommended to caulk the connection between the face plate and the wall using adhesive glue to prevent water from seeping into the outlet box.

For more detailed instructions and illustrations, please refer to the user manual provided with the product.

Note: It is important to follow local and National Electrical Code (N.E.C.) standards when making electrical connections. If you are unfamiliar with proper electrical wiring connections, it is recommended to contact and obtain the services of a qualified electrician.