Answer

Feb 14, 2025 - 12:06 AM
To adjust the spring force on the TOOLCRAFT 2483185 Compressed Air Hose Reel 10m, follow these steps:
1. Disconnect the product from the compressed air supply before carrying out any maintenance or repair work.
2. Remove the hose stop ring by carefully loosening the two screws with a suitable screwdriver.
3. Gently pull the hose end over the guide rollers on the hose guide.
4. To increase the spring force, rotate the hose drum clockwise (as seen from the hose inlet side). To decrease the spring force, rotate the hose drum anticlockwise (as seen from the hose inlet side).
5. Once you have finished adjusting the spring force, pull the hose end through the guide rollers and xxxx the hose stop ring back into place. Make sure to hold the hose drum in place while doing this.
Adjusting the spring force will change the amount of force required to roll and unroll the hose. By increasing the spring force, the hose will roll back onto the drum more tightly. Conversely, decreasing the spring force will make it easier to unroll the hose.
Please note that it is important to handle the product carefully and follow all safety instructions provided in the manual.
Add New Comment