User Manual Q&AAnswer
Feb 13, 2025 - 11:47 PM
To change the door opening direction on your Hisense RUR156D4AW1 refrigerator, follow these steps:
1. Unplug the appliance from the power source.
2. Remove all items from the refrigerator door.
3. Locate the upper hinge cover on the top of the refrigerator door and remove it.
4. Remove the xxxx hole cover for the door on the side of the refrigerator.
5. With the door closed, remove the screws on the outside of the hinges.
6. Open the hinges away from the door and undo the screws holding them to the cabinet.
7. Carefully turn the hinges over and place them on the diagonally opposite corner of the cabinet.
8. xxxx the hinges back in place.
9. Replace the door and reattach the hinges.
10. Check that the door is aligned horizontally and vertically and that the door seals are secure on all sides.
11. Finally, tighten the hinge bracket screws.
12. Replace the upper hinge cover and the xxxx hole cover for the door.
Please note that these instructions are a general guide and may vary slightly depending on your specific model. It is always recommended to refer to the user manual for detailed instructions and diagrams specific to your appliance.
Add New Comment