User Manual Q&AAnswer
Feb 13, 2025 - 11:35 PM
To connect devices to the eurolite SBM-63B Power Distributor, follow these steps:
1. Make sure the power distributor is disconnected from the mains before proceeding.
2. Identify the outputs on the rear panel of the power distributor. There are eight safety sockets and four 16 A three-phase current output sockets.
3. For devices that require a safety socket connection, simply plug the device's power cord into one of the safety sockets on the rear panel.
4. For devices that require a three-phase current connection, use the 16 A three-phase current output sockets. Connect the device's power cord to one of these sockets.
5. Ensure that the total power consumption of the connected devices does not exceed the maximum load of the power distributor.
6. Once all devices are connected, you can proceed to connect the power distributor to the mains using the CEE plug.
Note: It is important to follow the safety instructions and guidelines provided in the user manual to ensure safe and proper operation of the power distributor.
Add New Comment