User Manual Q&AAnswer
Feb 13, 2025 - 11:33 PM
To connect your devices to the eurolite SBM-63B Power Distributor, follow these steps:
1. Ensure that the power distributor is disconnected from the mains before proceeding.
2. Identify the outputs on the rear panel of the power distributor. There are eight safety sockets and four 16 A three-phase current output sockets.
3. For devices that require a standard power outlet, connect them to one of the eight safety sockets on the rear panel.
4. For devices that require a three-phase current connection, use the four 16 A three-phase current output sockets. These sockets are labeled as CEE sockets.
5. Make sure that the total power consumption of the connected devices does not exceed the maximum power consumption specified for the power distributor.
6. Once all devices are properly connected, you can proceed to connect the power distributor to the mains using the CEE plug. Ensure that the earth connection is properly made.
7. After the connections are made, you can switch on the power distributor and your devices should receive power.
Please refer to the user manual for additional safety instructions and guidelines for operating the eurolite SBM-63B Power Distributor.
Add New Comment