User Manual Q&AAnswer
Feb 13, 2025 - 11:29 PM
To install the Kirby 211203 Drop In Packaged Refrigeration Unit, follow these steps:
1. Ensure that you have all the necessary tools and equipment for installation.
2. Choose a suitable location for the unit, considering factors such as ventilation, accessibility, and proximity to power supply.
3. Remove the unit from its packaging and inspect it for any damage or missing parts. Refer to the user guide for a list of included components.
4. Connect the unit to the power supply using the provided 3-pin domestic cable plug. Make sure to follow electrical safety guidelines and consult a qualified electrician if needed.
5. Position the unit in the chosen location, ensuring proper clearance for air circulation and maintenance access.
6. Connect the refrigerant lines to the unit using the appropriate fittings. Refer to the user guide for detailed instructions on connecting the lines.
7. Install the evaporator coil, condenser coil, and room temperature probes according to the provided guidelines. These probes are essential for temperature control and monitoring.
8. Secure the unit in place using the provided tube support and saddles to reduce vibration and noise.
9. Check for any refrigerant leaks by performing a pressure test. If leaks are detected, consult a professional technician for repairs.
10. Once the installation is complete, turn on the unit and verify that it is running properly. Adjust the temperature settings using the Dixell electronic control panel, which is installed as standard on all models.
11. Regularly inspect and maintain the unit to ensure optimal performance and longevity. Refer to the user guide for maintenance instructions and recommended intervals.
Please note that this is a general overview of the installation process. For specific details and step-by-step instructions, refer to the Kirby 211203 Drop In Packaged Refrigeration Units User Guide provided with the product.
Add New Comment