User Manual Q&AAnswer
Feb 13, 2025 - 11:20 PM
To install the ATC W5-U Pacific Water Heating unit, follow these steps:
1. Ensure that the water heater is earthed and install it according to the provided installation instructions.
2. Only use the water heater for its intended purpose as described in the user manual.
3. It is recommended to have the water heater installed by a qualified installer.
4. Do not operate the water heater if it is not working properly or if it has been damaged or dropped.
5. Servicing of the water heater should only be done by qualified service personnel.
6. Make sure to examine and replace the anode rod at least once a year to prevent tank failure and leakage.
7. Connect the cable to a 13A double-pole Switched Spur.
8. If you are in a hard water area, it is important to fit a suitable water softener to prevent premature unit failure.
For more detailed instructions and information, please refer to the ATC W5-U Pacific Water Heating User Manual.
Add New Comment