User Manual Q&AAnswer
Feb 13, 2025 - 11:18 PM
To replace the batteries in the Beper 40.821 Keep Calm Digital Weighing Scales, follow these steps:
1. Carefully turn the scale upside down so that the bottom of the scale is accessible.
2. Press the battery compartment in the direction indicated by the arrow and open the cover by tapping it.
3. Insert the new batteries into the compartment according to the correct polarity. Pay attention to the correct polarity of the connection. Incorrect installation can damage the scale.
4. Close the cover and then turn the scale back on.
Note: When the scale does not turn on or displays "Lo," it means that the batteries are exhausted and need to be replaced. Make sure to remove the batteries when you are not going to use the scale for a long time to avoid any damage caused by battery liquid.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment