User Manual Q&AAnswer
Feb 13, 2025 - 11:16 PM
To connect the cables to the POGO blindmate connectors, follow these steps:
1. Insert the SMPM connections on the cables into the POGO holes.
2. On the opposite side of the POGO, hand tighten the nuts attached to the cables. Be careful not to over tighten the nuts.
3. Use the supplied cable strain relief. xxxx it into the stiffener using the hex head M4 x 16 bolts.
Please refer to the "Connecting cables to the POGO blindmate connectors" section in the user manual for visual references and additional information.
Add New Comment