User Manual Q&AAnswer
Feb 13, 2025 - 11:11 PM
To install the ET2 Contemporary Lighting E23400 Series Baritone LED Bath Vanity, follow these steps:
1. Before getting started, make sure to read the instructions carefully and gather all the required contents for assembly.
2. Choose a clean, level, and spacious area for assembly, avoiding hard surfaces that may damage the product.
3. Carefully open the package using a sharp tool like a cutter knife, being cautious not to damage the components inside.
4. Remove all packaging materials and retain them for future use.
5. Keep all hardware parts and packaging out of reach of small children.
6. Assemble the product in close proximity to where you intend to position it, taking care when lifting.
7. Install the back plate on the junction box using junction box screws, driving them completely to the end of the junction box.
8. Put two mounting screws on the back plate, then install the base plate and mounting plate.
9. Connect the supply wires to the wires on the fixture using wire nuts. Connect white to white, black to black, and green to green as a grounding connection.
10. Select the desired Color Temperature by setting the sliding switch to the target CCT (refer to Fig.2 in the manual).
11. Install the fixture on the mounting plate using the fixture screws provided.
12. For hanging fixture and wiring, it is recommended to consult a qualified electrician.
Please note that these instructions are a summary and it is essential to refer to the complete instruction manual provided with the product for detailed and accurate installation steps.
Add New Comment