User Manual Q&AAnswer
Feb 13, 2025 - 11:09 PM
To install the DREAMGRIP UG-KIT22 Upgrade Kit on your Evolution PRO/MOJO rig, please follow the step-by-step instructions provided in the installation guide:
1. Take out the Optics Module from the Rig. Slide the back-side bar to the middle of the Optics Module, ensuring that the phone locker is pointing to the left.
2. Use tweezers to remove the two small stoppers from the grooves on the bottom and top basements on THE LEFT SIDE ONLY. If you accidentally damage the stoppers, don't worry, as spare stoppers are included in the kit.
3. Slide out the bar from the Optics Module.
4. Pull the old sliders to free both ends of the bar. Keep the old sliders if you may need to use thin phones with the Rig.
5. Install the new sliders on the bar as shown in the picture. Please note that the "T" mark is for the TOP slider and the "B" mark is for the BOTTOM slider.
6. Insert the bar with the new sliders back into the grooves on the Optics Module. The T slider should be on the top, the B slider should be on the bottom, and the Phone Locker should have the leverage facing LEFT.
7. Use tweezers to insert the Stoppers into the cavities in the groove. To fix the Stoppers, push them gently towards the groove until they are locked inside.
8. Congratulations! You can now enjoy a more spacious Optics Module that can accommodate larger phone models like the iPhone 13 PRO, Samsung Galaxy 21 Ultra, and others.
Please refer to the provided pictures in the installation guide for visual assistance during the installation process.
Add New Comment