Answer

Feb 13, 2025 - 10:53 PM
To connect your SHARP SDW6767HS dishwasher to Wi-Fi and Amazon Alexa, you can follow these steps:
Step 1: Wi-Fi Connection
Option 1: With a Barcode
- Turn on the dishwasher by touching the Power button.
- Press and hold the Rinse Only and Hi Temp Wash buttons together for 5 seconds until "FR" appears on the display.
- Open the Amazon Alexa app on your mobile device, go to Devices, and tap the "+" button to add a device.
- Select the type of device and follow the instructions to scan the barcode located on the right side of the inner part of the door.
Option 2: Without a Barcode
- Turn on the dishwasher by touching the Power button.
- Press and hold the Rinse Only and Wash Zone buttons together for 5 seconds until "UG" appears on the display.
- Open the Amazon Alexa app on your mobile device, go to Devices, and tap the "+" button to add a device.
- Select the type of device, then choose "DON'T HAVE A BARCODE?" and follow the instructions.
Option 3: Zero Touch Setup
Note: This option is only available if your dishwasher was purchased through Amazon.com and Zero Touch Setup was applied to your personal Amazon account during checkout.
- Turn on the dishwasher by touching the Power button.
- Open the Amazon Alexa app on your mobile device, and it will automatically pair with your dishwasher.
- Alternatively, if you have an active Echo Dot (2nd Gen or later), it can also perform Zero Touch Setup.
Step 2: Enable Remote Command & Control
- Ensure that your dishwasher is connected to Wi-Fi and paired with the mobile app.
- To enable remote control, press and hold the Rinse Only and START/CANCEL buttons together for 5 seconds until the Wi-Fi indicator stops flashing and remains lit.
Once you have completed these steps, you should be able to control your SHARP SDW6767HS dishwasher using Amazon Alexa voice commands. You can refer to the Alexa Command List provided in the user guide for a list of supported commands and their usage.
Add New Comment