User Manual Q&AAnswer
Feb 13, 2025 - 10:46 PM
To install the Kaysun KMB-01 Prodigy Multifunction Board, please follow the steps below:
1. Open the electrical box and remove the existing PCB.
2. Insert the FRIMB-CABLE 2-terminal into CN32 on the PCB.
3. Open the display box and replace the old cable with FRIMB-CABLE1.
4. Install the display box assembly and electrical box assembly.
5. Install the support and multifunction box.
6. Connect all the cables as shown in point 1.B.
7. Neaten all the cables to finish the installation.
Please refer to the installation guide for visual references and further details.
Additional Notes:
- The Kaysun KMB-01 Prodigy Multifunction Board is compatible with both Wi-Fi function and a basic 4-wired controller simultaneously. The Wi-Fi port and wired controller ports are connected to different sockets on the display board.
- It is important to note that the wall controller and centralized controller cannot work at the same time. The Kaysun KMB-01 Prodigy Multifunction Board is compatible with the KC-03.2 SPS wall controller.
Add New Comment