User Manual Q&AAnswer
Feb 13, 2025 - 10:40 PM
To properly install and connect the H01 piezo fiber stretcher to the controller, please follow the steps outlined in the user manual:
1. Before installation, perform safety checks such as inspecting the connection wire for damage and ensuring the drive power supply is grounded.
2. Refer to the installation diagram provided in the manual. Neatly, evenly, and closely wrap the fiber in the groove of the stretcher.
3. Use M3 or M4 screws to fix and tighten the H01 piezo fiber stretcher securely.
4. Properly tighten the fixing screws to ensure stability.
5. Connect the product to the controller using the dedicated cable provided by CoreMorrow. Do not connect via an extension cable unless approved by CoreMorrow.
6. Avoid stretching and bending the cable interface to prevent damage to the cable.
Please note that the manual provides additional precautions and guidelines for installation and operation, so it is essential to read and follow the instructions carefully to ensure proper usage of the H01 piezo fiber stretcher.
Add New Comment