User Manual Q&AAnswer
Feb 13, 2025 - 10:31 PM
To connect speakers to the Redback A 4037/43/47 Four Input PA Amplifier, you will need to use the output terminals on the rear panel of the amplifier. The amplifier is designed to work with speakers fitted with a 100V line transformer. Make sure that the total load of the speakers does not exceed the rated output of the amplifier (40W for A 4037, 60W for A 4043, and 100W for A 4047). The minimum impedance for the speaker load should be 250Ω for 40W, 166Ω for 60W, and 100Ω for 100W. Always be careful to avoid short circuits and ensure proper connection to the correct terminals. Refer to Figure 2 in the instruction manual for a visual representation of the rear panel and speaker connections.
Add New Comment