Answer

Feb 13, 2025 - 10:05 PM
To assemble the Manhattan 462310 Aluminum Gas Spring Dual Monitor Desk Mount, please follow these steps:
1. Ensure that you have received all the parts listed in the component checklist before starting the installation.
2. Make sure the supporting surface can safely support the combined weight of the equipment and all attached hardware and components.
3. Use the provided mounting screws to attach the desk mount to the supporting surface. Do not over-tighten the screws.
4. Attach the gas spring arm to the desk mount by aligning the holes and securing it with the provided screws.
5. Attach the VESA plate to the back of your monitors using the appropriate screws. Make sure the VESA plate is securely fastened.
6. Slide the monitors onto the gas spring arm and adjust their positions as desired.
7. Use the included cable management clips to organize and secure the cables.
8. Once everything is properly assembled, check that the bracket is secure and safe to use at regular intervals, at least every three months.
Please note that this product is intended for indoor use only and should be installed by professionals. For more detailed instructions and specifications, you can refer to the manual available at manhattanproducts.com or contact their customer support through support.manhattanproducts.com/barcode/462310.
Add New Comment