User Manual Q&AAnswer
Feb 13, 2025 - 10:01 PM
To address the KUBUS M Beghelli Prazisa luminaire, you have two options: manual addressing or automatic addressing.
1. Manual Addressing:
The luminaire is equipped with a rotary switch for manual addressing. Here's how you can manually address it:
- Locate the rotary switch on the luminaire (refer to Fig. A in the manual).
- Set the rotary switch to the desired address, which can be any number from 1 to 16 for the first group of luminaires (refer to Fig. A).
- Set the rotary switch to any number from 17 to 32 for the second group of luminaires (refer to Fig. A).
2. Automatic Addressing:
Alternatively, you can address the luminaire automatically through the central system by read-in of the ID. Here's how you can do it:
- Follow the instructions provided by the central system to automatically address the luminaire.
- The central system will assign an address to the luminaire based on its ID (refer to Fig. A1).
Please note that it is important to consider the mains connections (L/+; N/-) and polarity (refer to Fig. B) when wiring the luminaire.
If you have any further questions or require repairs, it is recommended to contact an authorized service center to ensure the use of original spare parts. Using the luminaire for any purpose other than its intended use is considered improper and dangerous.
For additional information or support, you can reach out to Beghelli Präzisa GmbH through their email (Kontakt@beghelli.de) or visit their website (www.beghelli.de).
Add New Comment