User Manual Q&AAnswer
Feb 13, 2025 - 09:52 PM
To configure your AirTrack scanner to work with CellarTracker, follow these steps:
1. Make sure your scanner is powered on and connected to your computer.
2. Scan the following barcodes in order:
- Barcode 1: This barcode sets the scanner to read Interleaved 2 of 5 barcodes, which is the barcode format used by CellarTracker.
- Barcode 2: This barcode confirms the configuration change.
- Barcode 3 (optional): If you want to disable the scanner from always being enabled while placed in the stand, scan this barcode.
3. Once the configuration is complete, your AirTrack scanner should be ready to use with CellarTracker.
If you need further assistance with connecting the scanner to your computer or configuring it, you can contact AirTrack support at (888) 622-4982. They provide 30 days of free technical support with each purchase.
For more detailed instructions and information, you can refer to the full user manual for the device. You can download it from the following location: [Link to the manual](https://cdn.datalogic.com/Download?id...).
Note: The above instructions assume you have the wired AirTrack S2 scanner. If you have the Bluetooth-enabled AirTrack S2-BT scanner, please refer to the Bluetooth Configuration Notes provided in the product documentation
Add New Comment