Answer

Feb 13, 2025 - 09:48 PM
To change the impact force on the Makita DTW700 and DTW701 Cordless Impact Wrench, you can use the application mode button located on the tool. Pressing the button will cycle through the four different impact force modes: Max (4), Hard (3), Medium (2), and Soft (1). Each mode corresponds to a different level of impact force and is suitable for different types of fastening tasks. You can change the impact force mode within approximately one minute after releasing the switch trigger. The selected impact force mode will be indicated by the corresponding lamp on the switch panel. Please refer to the manual for more detailed information on each impact force mode and its recommended use.
Add New Comment