User Manual Q&AAnswer
Feb 13, 2025 - 09:43 PM
To assemble and install the TRIO LIGHTING 514260142 Outdoor Pole-Motion Sensor, please follow these steps:
1. Safety Precautions:
- Before starting the installation, carefully read and understand all the safety instructions provided in the instruction manual.
- Make sure the power supply is switched off before working on the installation.
- If you are unsure about any aspect of the installation, consult a qualified electrician.
2. Mounting the Sensor:
- Choose a suitable location for mounting the sensor on an outdoor pole or post.
- Ensure that the mounting surface is sturdy and can support the weight of the sensor.
- Use the provided screws and brackets to securely attach the sensor to the pole or post.
3. Electrical Connection:
- Make sure the power supply is switched off.
- Connect the wires from the sensor to the electrical supply according to the wiring diagram provided in the instruction manual.
- The sensor is designed for a 230V-50Hz power supply and can accommodate a maximum of 1xGU10 bulb with a maximum power rating of 35W.
4. Adjusting the Sensor Settings:
- Once the sensor is installed, you may need to adjust its settings to suit your requirements.
- Refer to the instruction manual for detailed instructions on adjusting the sensor's sensitivity, detection range, and duration of illumination.
5. Testing and Operation:
- After completing the installation and adjusting the settings, switch on the power supply.
- Test the motion sensor by moving within its detection range and checking if the light turns on as expected.
- If the sensor does not function properly, double-check the wiring connections and settings.
For further information and troubleshooting, please refer to the TRIO LIGHTING 514260142 Outdoor Pole-Motion Sensor Instruction Manual available at trio-lighting.com/514260142 or contact TRIO Lighting customer support at the provided contact details in the manual.
Add New Comment