User Manual Q&AAnswer
Feb 13, 2025 - 09:34 PM
To install the LOEWE Floor2Ceiling Stand, please follow these steps:
1. Ensure that the surface you set the stand on is stable and avoid direct sunlight.
2. Check the scope of delivery to ensure you have all the necessary components: A floor2ceiling stand, an adapter for the TV, a spacer, two screws M6x45, two screws M6x20, a bearing ceiling, and a bearing floor.
3. Begin by attaching the adapter to the back of your Loewe TV. Use the provided screws to secure it in place.
4. Determine the desired height for your TV and mark the position on the ceiling where the bearing ceiling will be installed.
5. Use appropriate tools and follow the instructions carefully to install the bearing ceiling securely.
6. Next, mark the position on the floor where the bearing floor will be installed. Ensure it is aligned with the bearing ceiling.
7. Install the bearing floor securely using the provided tools and following the instructions.
8. Attach the floor2ceiling stand to the bearing ceiling and bearing floor, ensuring it is firmly in place.
9. Use the spacer to adjust the distance between the TV and the floor2ceiling stand if necessary.
10. Once everything is securely installed, you can rotate your Loewe TV using the floor2ceiling stand. Ensure that the rotation is smooth and without any obstructions.
For further assistance or if you have any concerns during the installation process, you can contact Loewe's Customer Care Center at the provided address, telephone number, fax, or email.
Please note that any modification to the installation solution can cause instability and may void the warranty. It is important to follow the instructions provided in the manual for a safe and proper installation.
Add New Comment