How do I install the QAZQA 105114 Frances Brescia WL 2 Modern Wall Lamp? (QAZQA 105114 Frances Brescia WL 2 Wall Lamp Instruction Manual)

Answer

manuals.plus

Feb 13, 2025 - 09:02 PM

To install the , please follow the instructions provided in the manual carefully. Here is a step-by-step guide:

1. Before starting the installation, ensure that the electrical supply is switched off at the outset, preferably by means of a switch in the distribution box.

2. The installation of the luminaire should be carried out by authorized and qualified technicians according to the valid regulations for electrical installation. If you are not experienced in electrical work, it is recommended to consult a professional.

3. Make sure to take into account the minimal separation distance from other objects and the required room around the fitting.

4. When connecting the wires, pay attention to the symbols provided in the manual. The live conductor, earth conductor, and neutral conductor should be connected correctly.

5. Clamping screws in electrical connections must be adequately tightened, especially with 12V low voltage conductors.

6. Exterior lighting should not be installed during rain to ensure safety.

7. After installation, it is important to properly maintain the luminaire. Maintenance should be limited to the surfaces, and no moisture should come into contact with any areas of the terminal connections or voltage control parts.

8. Clean the luminaire with a clean, dry cloth or brush. Do not use solvents or abrasives. Avoid dampness on all electrical components.

Please note that this is a general guide, and it is always recommended to refer to the specific instructions provided in the QAZQA 105114 Frances Brescia WL 2 Modern Wall Lamp instruction manual for accurate and detailed installation steps.