User Manual Q&AAnswer
Feb 13, 2025 - 08:38 PM
To set the CPU type and voltage on the B59 V1.X main board, you need to refer to the jumper settings described in the user manual.
1. CPU Type Selection:
- Locate the jumpers labeled JP4 and JP10 on the motherboard.
- Use the jumper settings specified in the manual to select the desired CPU type. For example, if you have a Pentium 133MHz CPU, you would set JP4 to "Close" and JP10 to "Open".
2. CPU Voltage Selection:
- Locate the jumper labeled JP2 on the motherboard.
- Use the jumper settings specified in the manual to select the desired CPU voltage. For example, if you want to set the CPU voltage to 2.0V, you would set JP2 to "Open" for pins 1-2, "Close" for pins 3-4, and "Close" for pins 5-6.
Please note that it is important to follow the instructions in the manual carefully to ensure proper configuration of the CPU type and voltage on the B59 V1.X main board.
Add New Comment