User Manual Q&AAnswer
Feb 13, 2025 - 08:37 PM
To adjust the water flow on the beper P201UTP200 ZEN Water Fountain, follow these steps:
1. Disconnect the plug from the wall socket.
2. Lift the top cover of the fountain to access the pump. Gently pull upwards to detach the small suction cups.
3. Locate the flow regulation switch on the pump.
4. Slide the switch to the right or left to adjust the water flow to the desired level. There are four levels available.
5. Replace the cover back on the base.
6. Connect the plug to the wall socket.
Please note that it is important to disconnect the plug from the wall socket before adjusting the water flow. Also, make sure the base of the fountain is filled with water before connecting the plug to avoid damaging the pump.
Add New Comment