User Manual Q&AAnswer
Feb 12, 2025 - 05:48 AM
To mount the LARSON 224602 24V LED Motion Alarm System with Horn, follow these steps:
1. Ensure that you have a rigid, flat surface capable of supporting the load of the fixture.
2. The fixture comes with a back plate with pre-drilled mounting holes drilled into the flange.
3. Mark the hole locations where you wish to mount the light.
4. Pre-drill the holes to fit the hardware you will be using.
5. Mount the fixture to the location using bolts, washers, and nuts in each of the mount holes.
6. It is recommended to have two people for mounting since the fixture can be large and heavy.
7. Mounting hardware is not provided, but can be ordered from Larson Electronics if needed.
Please refer to the instruction manual for more detailed information and illustrations on the mounting process.
Add New Comment