User Manual Q&AAnswer
Feb 12, 2025 - 05:18 AM
To adjust the suction level of the Einhell GC-DP 7035 LL Dirt Water Pump, follow these steps:
1. Locate the pump's float switch. The float switch is the component responsible for controlling the pump's operation based on the water level.
2. The float switch is infinitely height-adjustable, meaning you can set it to the desired suction level. To adjust the suction level, simply rotate the float switch up or down.
3. By raising the float switch, you can increase the suction level, allowing the pump to start at a higher water height. Conversely, by lowering the float switch, you can decrease the suction level, causing the pump to start at a lower water height.
4. Adjust the suction level according to your specific needs and the water level you want the pump to activate at.
Note: The float switch should be set at a level that ensures the pump starts and stops at the desired water height. It is recommended to test the pump after adjusting the suction level to ensure it operates as intended.
For more detailed instructions and illustrations, please refer to the Einhell GC-DP 7035 LL Dirt Water Pump User Manual.
Add New Comment