User Manual Q&AAnswer
Feb 12, 2025 - 04:45 AM
To assemble the SHAF Diva Armchair, please follow these steps:
1. Lay out all the parts on a flat surface and ensure you have all the necessary components.
2. Each part is engraved with a letter that identifies it. Refer to the manual to identify each part correctly.
3. Begin by attaching the backrest to the seat. Align the holes on the backrest with the corresponding holes on the seat and insert the screws provided. Use the enclosed wrench to tighten the screws securely.
4. Next, attach the armrests to the seat. Align the holes on the armrests with the corresponding holes on the seat and insert the screws. Again, use the enclosed wrench to tighten the screws.
5. Attach the legs to the bottom of the seat. Align the holes on the legs with the corresponding holes on the seat and insert the screws. Tighten the screws using the enclosed wrench.
6. Repeat the above steps for the remaining armchair, if applicable.
7. Once all the parts are securely attached, check that all screws are tightened properly using the enclosed wrench.
8. After assembly, it is recommended to clean the armchair using soap, water, and a soft cloth. Avoid using harsh chemicals or abrasive materials that may damage the furniture.
Please note that the SHAF Diva Armchair is intended for domestic use only and should not be disassembled to avoid the risk of breakage. Retain the enclosed wrench for future use.
If you require further assistance or have any additional questions, please refer to the SHAF Diva Armchair Instruction Manual or contact the manufacturer, Sp·Berner Plastic Group SL, at the provided address or website.
Add New Comment