User Manual Q&AAnswer
Feb 12, 2025 - 04:42 AM
To replace the filters on the Arctic 305-883-5581 Freon Leak Detector, follow these steps:
1. Turn off the power to the unit and unplug it from the power source.
2. Locate the filter compartment on the unit. It is usually located on the front or side panel.
3. Open the filter compartment by removing any screws or latches that secure it.
4. Take out the old filters from the compartment. Note the direction of airflow indicated on the filters.
5. Clean the filter compartment using a soft cloth or brush to remove any dust or debris.
6. Install the new filters into the compartment, making sure to align them with the direction of airflow indicated on the filters.
7. Close the filter compartment and secure it with the screws or latches.
8. Plug the unit back into the power source and turn it on.
It is recommended to replace the filters periodically, depending on the usage and environmental conditions. Refer to the user manual for specific instructions on filter replacement and maintenance intervals.
Add New Comment