User Manual Q&AAnswer
Feb 12, 2025 - 04:38 AM
To properly prepare the cable for the Cabelcon TL505 TrueLock Connector, follow these steps:
1. Use Cabelcon's Dualstrip tool (item no. 28050575 for welded copper cables) for the proper preparation of the cable. Make sure to read the enclosed user instruction before operating the tool.
2. After completing the strip operation, the prepared cable dimensions should be as follows:
- A = 12.0mm
- B = 16.0mm
3. If necessary, clean the cable's inner conductor with a conductor cleaner (item no. 98500903) and the outer conductor with appropriate equipment.
By following these steps, you will ensure that the cable is properly prepared for the Cabelcon TL505 TrueLock Connector.
Add New Comment