User Manual Q&AAnswer
Feb 12, 2025 - 04:35 AM
Installation of the eisl ED69310DB Duroplast Toilet Seat is a straightforward process. Here is a step-by-step guide:
1. Start by removing the existing toilet seat if there is one. To do this, locate the wing nuts on the underside of the toilet bowl and unscrew them counterclockwise until the seat is loose enough to be lifted off.
2. Take the new eisl ED69310DB Duroplast Toilet Seat out of its packaging and identify the seat and lid components.
3. Place the seat component onto the toilet bowl, aligning the mounting holes on the seat with the holes on the toilet bowl.
4. Insert the provided bolts through the mounting holes on the seat, from the top side of the toilet bowl.
5. From the underside of the toilet bowl, secure the bolts in place by tightening the wing nuts onto the bolts. Ensure that the seat is firmly attached but avoid overtightening, as it may cause damage.
6. Once the seat is securely installed, you can attach the lid component by aligning it with the seat and gently pressing it down until it clicks into place.
7. To ensure proper functionality, only close the toilet lid by pressing it lightly. Excessive pressure can damage the automatic lowering mechanism.
For more detailed instructions and illustrations, you can refer to the instruction manual provided with the product. It is important to read and follow the safety notes and instructions for care mentioned in the manual to maintain the quality and longevity of the toilet seat.
If you require further assistance or have any specific questions, you can contact Eisl Sanitär GmbH directly through their website or email provided in the manual.
Add New Comment