User Manual Q&AAnswer
Feb 12, 2025 - 04:31 AM
To charge the battery for the SHARK BOFIT 17017 Remote Control Water Toy, follow these steps:
1. Use the USB cord (included) to connect the 3.7V battery to a USB outlet (not included).
2. Charge the battery for 90 minutes. While charging, a red light on the cord will be lit.
3. When the light turns off, it indicates that the battery is fully charged.
4. The playtime of a fully charged battery is approximately 20 minutes.
Please note that the battery should be inserted into the vehicle after it has been charged. Open the hatch of the boat by turning the lever lock to the left and lifting the hatch open. Insert and plug the charged 3.7V battery into the vehicle. Once the battery is plugged in, insert the hatch of the boat into the top of the base at a 45-degree angle, push it in and forward, and lock the hatch.
For the remote control, open the battery compartment on the side. Insert 2 x AA batteries (not included) correctly, matching the positive (+) and negative (-) signs. Close the battery compartment.
Once both the vehicle and the remote have working batteries, turn the ON/OFF button on the side of the remote control to ON. Put the boat on water, and it will turn on. Please note that the boat won't work until it is in the water.
Remember to follow the battery safety information provided in the manual and dispose of batteries responsibly.
Add New Comment